Green Walls

A green wall is a wall partially or completely covered with vegetation that includes a growing medium, such as soil. Most green walls also feature an integrated water delivery system. Green walls are also known as living walls, BIOboards, biowalls, ecowalls, or vertical gardens.

Such walls may be indoors or outside, freestanding or attached to an existing wall, and come in a great variety of sizes. As of 2012, the largest green wall covers 2,700 square meters (29,063 square feet or more than half an acre) and is located at the Los Cabos International Convention Center.

Green walls have seen a recent surge in popularity. Of the 61 large-scale outdoor green walls listed in an online database provided by greenroof.com, 80% were constructed in or after 2009 and 93% dated from no later than 2007.Many Iconic green walls have been constructed by Institutions and in public places such as Airports and are now becoming common, to improve the aesthetics. For example: Edmonton International Airport(Canada), Changi International Airport (Singapore) & Chhattrapati Shivaji International Airport (Mumbai, India)

While Patrick Blanc is sometimes credited as having developed the concept in the late 1980s, the actual inventor is Stanley Hart White, a Professor of Landscape Architecture who patented a green wall system in 1938.

Green walls are often constructed of modular panels that hold a growing medium and can be categorized according to the type of growth media used: loose media, mat media, and structural media.

Loose media

Loose medium walls tend to be “soil-on-a-shelf” or “soil-in-a-bag” type systems. Loose medium systems have their soil packed into a shelf or bag and are then installed onto the wall. These systems require their media to be replaced at least once a year on exteriors and approximately every two years on interiors. Loose soil systems are not well suited for areas with any seismic activity. Repairs can only be made by re-stuffing soil into the holes on the wall, which is both difficult and messy. Loose-soil systems should not be used in areas where there will be a lot of public interaction as they are quite messy and lose their soil little by little over time. Most importantly, because these systems can easily have their medium blown away by wind-driven rain or heavy winds, these should not be used in applications over 8 feet high. There are some systems in Asia that have solved the loose media erosion problem by use of shielding systems to hold the media within the green wall system even when soil liquefaction occurs under seismic load. In these systems, the plants can still up-root themselves in the liquified soil under seismic load, and therefore it is required that the plants be secured to the system to prevent them from falling from the wall. Loose-soil systems without physical media erosion systems are best suited for the home gardener where occasional replanting is desired from season to season or year to year. Loose-soil systems with physical media erosion systems are well suited for all green wall applications.

Mat media

Mat type systems tend to be either coir fiber or felt mats. Mat media are quite thin, even in multiple layers, and as such cannot support vibrant root systems of mature plants for more than three to five years before the roots overtake the mat and water is not able to adequately wick through the mats. The method of reparation of these systems is to replace large sections of the system at a time by cutting the mat out of the wall and replacing it with new mat. This process compromises the root structures of the neighboring plants on the wall and often kills many surrounding plants in the reparation process. These systems are best used on the interior of a building and are a good choice in areas with low seismic activity and small plants that will not grow to a weight that could rip the mat apart under their own weight over time. It is important to note that mat systems are particularly water inefficient and often require constant irrigation due to the thin nature of the medium and its inability to hold water and provide a buffer for the plant roots. This inefficiency often requires that these systems have a water re-circulation system put into place at an additional cost. Mat media are better suited for small installations no more than eight feet in height where repairs are easily completed.

Structural media

Structural media are growth medium “blocks” that are not loose, nor mats, but which incorporate the best features of both into a block that can be manufactured into various sizes, shapes and thicknesses. These media have the advantage that they do not break down for 10 to 15 years, can be made to have a higher or lower water holding capacity depending on the plant selection for the wall, can have their pH and EC’s customized to suit the plants, and are easily handled for maintenance and replacement. They are the most robust option for a living wall in both exterior and interior applications. They are also the best choice in areas where high-winds, seismic activity or heights need to be addressed in the design. Structural media are superior to the other media for their longevity and high-level of performance in a variety of circumstances. Depending on the installation, they do tend to be more expensive to install, but lower cost to maintain.

There is also some discussion involving “active” living walls. An active living wall actively pulls or forces air through the plants leaves, roots and growth medium of the wall and then into the building’s HVAC system to be recirculated throughout the building. A problem with these systems is that building code still requires all the standard air filtration equipment that would have to be installed anyway, despite the living wall’s installation. This means that active living walls do not improve air quality to the point that the installation of other air quality filtration systems can be removed to provide a cost-savings. Therefore, the added cost of design, planning and implementation of an active living wall is still in question. With further research and UL standards to support the air quality data from the living wall, building code may one day allow for our buildings to have their air filtered by plants.

The area of air quality and plants is continuing to be researched. The majority of the research cited is from NASA’s studies performed in the 1970s and 1980s by B.C. Wolverton.There was also a study performed at the University of Guelph by Alan Darlington. Other research has shown the effect the plants have on the health of office workers.“The Effect of Indoor Foliage Plants on Health and Discomfort Symptoms among Office Workers”. Retrieved 2010-12-23..

Function

An indoor green wall in an office in Hong Kong.

Green walls are found most often in urban environments where the plants reduce overall temperatures of the building. “The primary cause of heat build-up in cities is insolation, the absorption of solar radiation by roads and buildings in the city and the storage of this heat in the building material and its subsequent re-radiation. Plant surfaces however, as a result of transpiration, do not rise more than 4–5 °C above the ambient and are sometimes cooler.”

Living walls may also be a means for water reuse. The plants may purify slightly polluted water (such as greywater) by absorbing the dissolved nutrients. Bacteria mineralize the organic components to make them available to the plants. A study is underway at the Bertschi School in Seattle, Washington using a GSky Pro Wall system, however, no publicly available data on this is available at this time.

Living walls are particularly suitable for cities, as they allow good use of available vertical surface areas. They are also suitable in arid areas, as the circulating water on a vertical wall is less likely to evaporate than in horizontal gardens.

The living wall could also function for urban agriculture, urban gardening, or for its beauty as art. It is sometimes built indoors to help alleviate sick building syndrome.

0 Comments

Landscape Irrigation Services: Nurturing Nature with Four Leaf Landscape

Landscape Irrigation Services: Nurturing Nature with Four Leaf Landscape

Unlock the secret to a lush landscape with Four Leaf Landscape’s innovative irrigation solutions. Our blog post delves into the world of automated sprinkler systems and water management strategies that guarantee a verdant lawn with every drop. Learn how smart irrigation can be a game-changer for your green spaces, ensuring sustainability and beauty in harmony. Join us as we explore the transformative power of efficient watering practices designed for the modern age.

read more
Civil Works & Hardscape Landscaping Services: The Foundation of Lasting Beauty with Four Leaf Landscape

Civil Works & Hardscape Landscaping Services: The Foundation of Lasting Beauty with Four Leaf Landscape

Step into the realm of Civil Works & Hardscape Landscaping Services with Four Leaf Landscape, where we sculpt the earth’s canvas into functional art. From the structural grace of amphitheater-style steps to the practical elegance of paved pathways, our hardscaping services lay the foundation for sustainable and stunning landscapes. Join us as we explore the synergy of robust materials and green design, creating outdoor spaces that stand the test of time and invite communal harmony.

read more
Pools & Water Features Landscaping Services: Crafting Liquid Serenity with Four Leaf Landscape

Pools & Water Features Landscaping Services: Crafting Liquid Serenity with Four Leaf Landscape

Dive into the depths of bespoke aquatic luxury with Four Leaf Landscape as we unveil the intricate craft behind our pool and water feature designs. From the shimmering mosaic tiles to the tranquil waters, each element is a testament to our commitment to creating not just a pool, but an experience of serene opulence. Discover how we transform simple spaces into exquisite aquatic escapes in our latest blog post.

read more